{ "currentVersion": 10.91, "cimVersion": "2.9.0", "id": 2158, "name": "GraniteMtn_GeologicLines", "type": "Feature Layer", "description": "This GIS dataset is reproduced from Richard K. Hose, 1974, Geologic Map of the Granite Mountain SW quadrangle, Juab and Millard Counties, Utah: U.S Geological Survey Miscellaneous Investigations Series Map I-831, 1 plate, scale 1:24,000. The map covers one standard 7.5\u2032 quadrangle in west-central Utah. The GIS dataset was completed by Emilie Breitenstein and David Tomlinson, students at Brigham Young University, and final GIS review and preparation for public release were completed by Zach Anderson and Martha L. Jensen, GIS Analysts with the Utah Geological Survey (UGS).The UGS appreciates the volunteered time and effort of Brigham Young University students Emilie Breitenstein and David Tomlinson who produced the GIS data for this project under the guidance of Brigham Young University professor Eric Christiansen.The quadrangle is in the Basin and Range physiographic province of west-central Utah and is dominated by north-south trending mountain ranges and broad valleys. The ranges expose Triassic through Devonian strata. The structure reflects the Sevier fold-thrust belt and subsequent extensional tectonics. Tertiary sedimentary and volcanic rocks partly conceal the older strata. The valleys are filled with thick basin-fill deposits of diverse origin.This dataset was produced as part of a UGS multi-decade effort to provide statewide GIS data to the public, federal to local government agencies, educational groups, exploration and development companies, and other map users. The GIS dataset reproduces the original source map as close as reasonably possible; however, some geologic decisions were made to resolve cartographic issues such as attributing faults and folds. We changed some geologic line symbols to better match the UGS 2018 data model. While the map is considered a good representation of the geology of the map area, users should be aware that it was produced in 1974 and does not meet all modern cartographic, spatial control, or geologic standards. Line attributes and symbology were selected from current (2018) UGS schema and do not necessarily match the intent of the original map. Selected attributes most closely represent the general geologic interpretation depicted on the original map, but are not an exact match, as noted below. ContactsOriginal attributes are \u201cContact \u2013 dotted where concealed.\u201dThese lines are now depicted as \u201cContact, well located;\u201d, \"Contact, approximately located;\" or\u201cContact, concealed.\u201dUnknown Faults Original attributes are \u201cFault \u2013 Dashed where poorly exposed or inferred; dotted where concealed. Bar and ball on downthrown side, queried where doubtful. Arrows show direction of relative movement.\u201d These lines are now depicted as \u201cFault, unknown, well located;\u201d, \u201cFault, unknown, approximately located;\u201d or \u201cFault, unknown, concealed.\u201d These faults are symbolized as normal faults per the UGS schema to match the appearance of the original map.General faults\u201cGeneral faults\u201d do not have a description in the explanation of the original map. These lines are now depicted as \u201cFault, unknown, well located;\u201d,\u201cFault, unknown, approximately located;\u201d, \u201cFault, unknown, approximately located, queried;\u201dor \u201cFault, unknown, concealed.\u201dThrust FaultsOriginal attributes are \u201cLow-angle fault \u2013 Dashed where poorly exposed or inferred; dotted where concealed. Sawteeth on upper plate.\u201d These lines are now depicted as \u201cFault, thrust, well located;\u201d, \u201cFault, thrust, approximately located;\u201d, or \u201cFault, thrust, concealed\u201d where older rocks are faulted over younger rocks. Detachment FaultsOriginal attributes are \u201cLow-angle fault \u2013 Dashed where poorly exposed or inferred; dotted where concealed. Sawteeth on upper plate.\u201d These lines are now depicted as \u201cFault, detachment, type1, well located;\u201d, \u201cFault, detachment, type1, approximately located;\u201d or \u201cFault, detachment, type1, concealed\u201dwhere younger rocks are faulted over older rocks.AnticlineOriginal attributes are \u201cAnticline \u2013 Showing approximate position of axial trace. Dotted where concealed.\u201d These lines are now depicted as \"Fold, anticline, upright, well located;\u201d, \u201cFold, anticline, upright, approximately located;\"or \"Fold, anticline, upright, concealed.\"Crest of minor anticlineOriginal attributes are \u201cCrest of minor anticline \u2013 Dashed where approximate; dotted where concealed.\u201dThese lines have been converted to \"Fold, anticline, upright, well located;\u201d, \u201cFold, anticline, upright, approximately located;\",\"Fold, anticline, upright, concealed;\"or the symbol \u201cFold, minor anticline.\u201dSynclineOriginal attributes are \u201cSyncline \u2013 Showing approximate position of axial trace; dotted where concealed.\u201dThese lines are now depicted as \u201cFold, syncline, upright, well located;\u201d, \u201cFold, syncline, upright, approximately located;\", \u201cFold, syncline, upright, concealed.\u201d Trough of minor synclineOriginal attributes are \u201cTrough of minor syncline \u2013 Dashed where approximate; dotted where concealed.\u201dThese lines are now depicted as \u201cFold, syncline, upright, well located;\u201d, \u201cFold, syncline, upright, approximately located;\"or \u201cFold, syncline, upright, concealed;\u201d or the symbol \u201cFold, minor syncline.\u201dUnits \u2013 Descriptions/Names/AgesMap is not modified from original source map even in locations where newer interpretations may exist.", "geometryType": "esriGeometryPolyline", "sourceSpatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "copyrightText": "Program Manager: Grant C. Willis (UGS) \nProject Manager: Donald L. Clark (UGS) \nGIS and Cartography: Emilie Breitenstein (Brigham Young University), David Tomlinson (Brigham Young University), Martha L. Jensen (UGS), and Zach Anderson (UGS)\nGeology review: see original source document\nGIS review: Kent D. Brown (UGS)", "parentLayer": { "id": 2140, "name": "Granite Mtn 7.5 OFR-681DM" }, "subLayers": [], "minScale": 288895, "maxScale": 0, "referenceScale": 24000.0, "drawingInfo": { "renderer": { "type": "uniqueValue", "field1": "RuleID", "fieldDelimiter": ", ", "defaultSymbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 255, 0, 0, 255 ], "width": 4 }, "defaultLabel": "Invalid Rule", "uniqueValueInfos": [ { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.4 }, "value": "1", "label": "Boundary, quadrangle" }, { "symbol": { "type": "esriSLS", "style": "esriSLSDash", "color": [ 0, 0, 0, 255 ], "width": 0.2 }, "value": "2", "label": "Contact, approximately located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.2 }, "value": "3", "label": "Contact, well located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSDash", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "4", "label": "Fault, unknown, approximately located " }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 5.81 }, "value": "5", "label": "Fault, unknown, concealed " }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "6", "label": "Fault, unknown, well located " }, { "symbol": { "type": "esriSLS", "style": "esriSLSDash", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "7", "label": "Fault, thrust, approximately located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.95 }, "value": "8", "label": "Fault, thrust, concealed" }, { "symbol": { "type": "esriSLS", "style": "esriSLSDash", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "9", "label": "Fault, thrust, well located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSDash", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "10", "label": "Fault, unknown, approximately located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSDash", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "11", "label": "Fault, unknown, approximately located, queried" }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.95 }, "value": "12", "label": "Fault, unknown, concealed" }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "13", "label": "Fault, unknown, well located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "14", "label": "Fault, detachment, well located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSDash", "color": [ 0, 0, 0, 255 ], "width": 0.9 }, "value": "15", "label": "Fault, detachment, approximately located" }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.95 }, "value": "16", "label": "Fault, detachment, concealed" }, { "symbol": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 0, 0, 0, 255 ], "width": 0.27 }, "value": "17", "label": "Contact, concealed" } ] }, "scaleSymbols": true, "transparency": 0, "labelingInfo": null }, "defaultVisibility": true, "extent": { "xmin": -1.26626849618E7, "ymin": 4793540.239399999, "xmax": -1.2648758654699778E7, "ymax": 4811589.937799998, "spatialReference": { "wkid": 102100, "latestWkid": 3857, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -20037700, "falseY": -30241100, "xyUnits": 10000, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText", "displayField": "FeatureName", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": [ { "name": "OBJECTID", "type": "esriFieldTypeOID", "alias": "OBJECTID", "domain": null }, { "name": "Shape", "type": "esriFieldTypeGeometry", "alias": "Shape", "domain": null }, { "name": "LayerInt", "type": "esriFieldTypeSmallInteger", "alias": "LayerInt", "domain": null }, { "name": "Layer", "type": "esriFieldTypeString", "alias": "Layer", "length": 10, "domain": null }, { "name": "Feature", "type": "esriFieldTypeString", "alias": "Feature", "length": 100, "domain": null }, { "name": "Type", "type": "esriFieldTypeString", "alias": "Type", "length": 50, "domain": null }, { "name": "Subtype", "type": "esriFieldTypeString", "alias": "Subtype", "length": 50, "domain": null }, { "name": "Modifier", "type": "esriFieldTypeString", "alias": "Modifier", "length": 50, "domain": null }, { "name": "FeatureName", "type": "esriFieldTypeString", "alias": "FeatureName", "length": 100, "domain": null }, { "name": "Source", "type": "esriFieldTypeString", "alias": "Source", "length": 150, "domain": null }, { "name": "Notes", "type": "esriFieldTypeString", "alias": "Notes", "length": 250, "domain": null }, { "name": "RuleID", "type": "esriFieldTypeInteger", "alias": "RuleID", "domain": { "type": "codedValue", "name": "WS26_GraniteMtn_GeologicLines_Rep_Rules", "description": "Representation rules", "codedValues": [ { "name": "Boundary, quadrangle", "code": 1 }, { "name": "Contact, approximately located", "code": 2 }, { "name": "Contact, well located", "code": 3 }, { "name": "Fault, unknown, approximately located ", "code": 4 }, { "name": "Fault, unknown, concealed ", "code": 5 }, { "name": "Fault, unknown, well located ", "code": 6 }, { "name": "Fault, thrust, approximately located", "code": 7 }, { "name": "Fault, thrust, concealed", "code": 8 }, { "name": "Fault, thrust, well located", "code": 9 }, { "name": "Fault, unknown, approximately located", "code": 10 }, { "name": "Fault, unknown, approximately located, queried", "code": 11 }, { "name": "Fault, unknown, concealed", "code": 12 }, { "name": "Fault, unknown, well located", "code": 13 }, { "name": "Fault, detachment, well located", "code": 14 }, { "name": "Fault, detachment, approximately located", "code": 15 }, { "name": "Fault, detachment, concealed", "code": 16 }, { "name": "Contact, concealed", "code": 17 }, { "name": "Free Representation", "code": -1 } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "Shape_Length", "type": "esriFieldTypeDouble", "alias": "Shape_Length", "domain": null } ], "geometryField": { "name": "Shape", "type": "esriFieldTypeGeometry", "alias": "Shape" }, "indexes": [ { "name": "FDO_OBJECTID", "fields": "OBJECTID", "isAscending": true, "isUnique": true, "description": "" }, { "name": "FDO_Shape", "fields": "Shape", "isAscending": true, "isUnique": false, "description": "" } ], "subtypes": [], "relationships": [], "canModifyLayer": true, "canScaleSymbols": true, "hasLabels": false, "capabilities": "Query,Map,Data", "maxRecordCount": 2000, "supportsStatistics": true, "supportsExceedsLimitStatistics": true, "supportsAdvancedQueries": true, "supportedQueryFormats": "JSON, geoJSON, PBF", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "supportedSpatialRelationships": [ "esriSpatialRelIntersects", "esriSpatialRelContains", "esriSpatialRelCrosses", "esriSpatialRelEnvelopeIntersects", "esriSpatialRelIndexIntersects", "esriSpatialRelOverlaps", "esriSpatialRelTouches", "esriSpatialRelWithin", "esriSpatialRelRelation" ], "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": true, "supportsPercentileStatistics": true, "supportsHavingClause": true, "supportsOrderBy": true, "supportsDistinct": true, "supportsCountDistinct": true, "supportsPagination": true, "supportsLod": false, "supportsQueryWithLodSR": false, "supportsTrueCurve": true, "supportsQueryWithDatumTransformation": true, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": true, "supportsTimeRelation": true, "supportsSqlFormat": false, "supportsQueryAnalytic": false }, "supportsDatumTransformation": true, "dateFieldsTimeReference": { "timeZone": "Mountain Standard Time", "respectsDaylightSaving": false }, "preferredTimeReference": null, "datesInUnknownTimezone": false, "hasGeometryProperties": true, "geometryProperties": { "shapeLengthFieldName": "Shape_Length", "units": "esriMeters" }, "hasMetadata": true, "isDataArchived": false, "archivingInfo": { "supportsQueryWithHistoricMoment": false, "startArchivingMoment": -1 }, "supportsCoordinatesQuantization": true, "supportsDynamicLegends": false }